KYOCERA Develops World’s Smallest Crystal Unit for Smartphones, Wearables
May 3, 2017
Kyoto/Neuss – Kyocera Crystal Device Corporation (herein “KCD”; President: Shigeaki Kinori), a specialist in the development and manufacturing of crystal devices, today announced that it has developed the world’s smallest crystal unit for smartphones, wearables, and other electronic devices. The new CX1008 quartz crystal unit measures just 1.0 x 0.8mm yet delivers the same electrical characteristics as Kyocera’s conventional CX1210 model, enabling it to be adopted without circuit board revision. Samples will be available in May 2017 with mass production slated for early 2018.
|Application||Smartphones, wearable devices|
|Size||1.0 X 0.8mm|
|Frequency temperature coefficient||±10ppm (-30°C to +85°C)|
|CI value (equivalent series resistance)||60Ω MAX (37.4MHz)|
|Production facility||Shiga Yohkaichi Plant (Japan)|
Crystal units are used to generate highly stable reference signals in digital circuits, based on the unique material characteristic of quartz to oscillate at a precise frequency when a specific voltage is applied. The trend toward smaller, more functional smartphones and wearable devices requires smaller, better-performing crystal units. Traditionally, however, it was believed that miniaturizing crystal units beyond a certain point would compromise their performance, since electrical characteristics (such as equivalent series resistance) degraded as the device became smaller. However, Kyocera has succeeded in downsizing the crystal unit while maintaining its electrical characteristics — with its current CX1210 (1.2x1.0mm) device, and now, by commercializing the ultra-small CX1008 (1.0x0.8mm) crystal unit. This has been accomplished through crystal element design technology developed exclusively by Kyocera, along with a process that Kyocera developed jointly with Associate Professor Kazuya Yamamura of Osaka University.
Based on this technology, Kyocera will accelerate the development of new low-frequency, high-frequency and high-precision oscillators for such applications as automotive electronics, Advanced Driver Assistance System (ADAS) technologies, IoT devices, wireless network base stations and 5G mobile communications.
1．World’s smallest crystal unit with electrical characteristics of the existing CX1210
Downsizing from 1.2x1.0mm to 1.0x0.8mm would ordinarily increase equivalent series resistance (CI value) by approximately 30 percent, requiring circuit board revision. However, by optimizing the design using its own piezoelectric analysis technology, Kyocera has downsized this device to 1.0 x 0.8mm while maintaining the electrical characteristics of the conventional CX1210 crystal unit. This allows the CX1008 to be incorporated into existing circuit designs without revision.
With conventional processes and technologies, a crystal unit exhibits higher levels of variation in key electrical characteristics when produced in smaller dimensions. However, Kyocera has avoided this by applying ultra-high-precision processing (plasma CVM technology) developed with Yamamura. This method, using plasma-generated neutral radicals and a chemical reaction at the surface of an object, enables to control a quartz crystal with highly precise surface conditions and thickness. Further, Kyocera’s proprietary semiconductor processing technology ensures extremely accurate external dimensions, and minimal variation in equivalent series resistance, for optimal performance at reduced size.
About KYOCERA Crystal Device Corporation
Kyocera Crystal Device Corporation supplies quartz crystal products worldwide, contributing to the development of the ubiquitous networked society. Quartz crystal devices are key components with great influence on the performance of mobile phones, digital cameras and other digital equipment. Kyocera Crystal Device Corporation is one of the world’s leading producers of quartz crystal devices, controlling every aspect of production from growing synthetic quartz crystals to delivering finished products, including quartz crystal units, crystal oscillators, SAW filters and optical devices.
 KCD will be consolidated into Kyocera Corporation as of April 1, 2017.
 Based on research by KCD (as of February 2017)
 CVM: Chemical Vaporization Machining
For more information on Kyocera: www.kyocera.eu
Contact for journalists
Manager Corporate Communications
Contact for product information
- KYOCERA Introduces New Z-series Clock Oscillators
- Innovative, beautiful, durable: KYOCERA presents high-quality kitchen tools demonstrating the advantages of its ceramic technology
- KYOCERA TCL Solar Completes 21.1 MW Solar Power Plant on Repurposed Land in Japan
- KYOCERA and 7 Other Companies Announce Progress of Development Plan for Max. 480-Megawatt Solar Power Project
- KYOCERA Introduces Irish Claddagh Ring Designed by Paul Costelloe, Using Hypoallergenic COBARION
- KYOCERA Receives Japan Environment Minister’s Award for Record 8th Consecutive Year
- KYOCERA Develops Some of World’s Smallest Multilayer Ceramic Capacitors for Mobile Devices
- KYOCERA to Expand Medical Product Development
- KYOCERA Breaks Ground on New Manufacturing Plant for Ceramic Structural Components in Kagoshima, Japan
- For the thirty-third time in its history, the Inamori Foundation has conferred the Kyoto Prize to researchers who have contributed to the fields of “Advanced Technology”, “Basic Science” and “Arts and Philosophy”
- A dream kitchen present under the Christmas tree
- KYOCERA Begins Research in AI-based Image Recognition to Help Diagnose Skin Diseases and Cancers via Smartphone
- KYOCERA enhances its AI-based Online Image Classifying Service “Labellio” with Higher Capacity for Big Data
- KYOCERA’s Kyoto Opal Sparkles in New Glitters by Nail Labo
- KYOCERA Technology Used to Create one of the World’s Smallest Crystal Units Awarded Prestigious Research Prize in Japan